Tunze Turbelle Masterstream 6550
For aquariums >5,000 liters (1,320 USgal.).
Flow rate: 30,000 to approx. 50,000 l/h
(7,900 to approx. 13,000 USgal./h)
Flow velocity: 0.8 - 1.3 m/s (31.5" - 51"/sec.)
Energy consumption: max. 110 W
Power supply unit: 100-240V / 50-60Hz / 12V DC
Cable length: 10 m (393.6")
Dimensions (L x W x H): 340 x 165 x 227 mm (13.4" x 6.5" x 8.9")
Output: ø125 mm (4.9")
Attachment to pipe, ø32 mm (1.3")
TUNZE® Turbelle® masterstream ... it streams in the shadows
The Turbelle® masterstream pumps are intended for the high-performance propeller pump market segment, and primarily predetermined for an implementation in experience zoos, research institutes, rehabilitation clinics and fish or algae farms. We also offer a version for aquarists who operate large aquariums and require a strong as well as wide flow rate for their reef tanks. Turbelle® masterstream pumps are designed to provide a maximum degree of efficiency, combined with a low energy consumption. Thanks to the extra-low safety voltage of the electronic TUNZE® PM motor, the pumps will operate at a pleasant noise level even at peak performance, while consuming significantly less power for the same output compared to conventional water pumps.
Turbelle® masterstream
Controllable performance
The Turbelle® masterstream pumps are electronically speed-controlled by Turbelle® Controller / Multicontroller / SmartController 7000. They can be used ideally for water circulation, wave action or wave-and-tide simulations.
100% corrosion-resistant
All parts of the pumps are made of ASA, POM and adjuvant enriched PA6.6. PU coated cable; the motor axle is made of titanium alloy; the motor and the electronics are cast in polyurethane (PU) resin.
No external control
The pump control is integrated completely in the motor block ensuring a low-maintenance operation with high efficiency and ideal water cooling. All Turbelle® masterstream pumps only require one external power supply unit or safety connector with a corresponding direct-current source (battery, solar cell, et cetera).
Turbelle® masterstream
Eco-energetic
A small sample calculation using Turbelle® masterstream 6580 (80 m³/h (21 USgal./h) – 420 W) reveals that energy efficient water movement results in enormous cost effectiveness:
Tank volume: 60 m³ (15.9 USgal.), flow selection by centrifugal pump (32 m³/h (8.5 USgal./h) – 2,200 W). At an annual operating time of 8,760 hours and a kilowatt price of € 0.35 / £ 0.30 / US$ 0.36 this results in a cost saving of about € 5,382 / 4,700 £ / US$ 5,610 per annum.
An intelligent and innovative micro-processor...
controlled PM motor operating on safety extra-low voltage of 12 V to 24 V is the core of the Turbelle® masterstream.
Hose clamps for attachment to...
PVC pipe or rod, ø32 mm (1.3").
The pump housing is used...
as a huge intake strainer; the suction area is 3.95 times larger than the discharge area. The Turbelle® masterstream needs no additional intake strainer.
Performance propeller with low rotational...
speed and axle made of titanium alloy.
Flow rectifier, ø125 mm (4.9")...
with integrated protection against injury in keeping with European standard EN 60335-1.
