Trigger Systems Sapphire Cube 20 C Refugium Sump
The Sapphire series introduces several new features not found anywhere else. Some of the features of the Sapphire sumps are:
- Lid to prevent splashing
- Adjustable water height
- Self adjusting foam block platform (PAT PENDING)
- Dual platforms
- Protein skimmer section
- Refugium section
- Sapphire blue coloring to block light and prevent unwanted algae growth in other sections
Trigger Systems Sapphire Cube 20 C Refugium Sump
The Sapphire series introduces several new features not found anywhere else. Some of the features of the Sapphire sumps are:
- Lid to prevent splashing
- Adjustable water height
- Self adjusting foam block platform (PAT PENDING)
- Dual platforms
- Protein skimmer section
- Refugium section
- Sapphire blue coloring to block light and prevent unwanted algae growth in other sections
Interchangeable Plates
- Filter Sock Plate
- Foam Block Plate
The filter sock plate is installed when the included 100 micron filter socks are desired.
The foam block plate is perforated with holes and comes with a foam sponge block filter. The foam block plate can be used when filter socks are not desired or in the case when the filter socks need to be changed or cleaned but replacements socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.
Adjustable Water Level
Water level in the sump is adjustable from 7” to 9.5” to accommodate for the water height requirements for different protein skimmers.
Self Adjusting Foam Block
As the water level is adjusted by sliding the wall up and down, the foam block sponge filter and the perforated plate that it sits on will also move up and down automatically. This is important to maintain the correct location of the foam block sponge filter with respect to the sump water height.
Probe Holder
All Sapphire sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.
Hose Holder
All Sapphire sumps also come with 4 holes in the top support brace for holding in place 1/4” OD tubing from reactors, dosing pumps, ATO, etc.
Trigger Systems Sapphire 20 CSpecifications:
- Dimensions: 20″ long x 20″ wide x 15″ high
Skimmer Section: 11.625″ x 9″
Refugium Section: 19.5″ x 6″
Return Pump Section: 10.25″ x 7.625″
Total Water Volume: 24.3 gallons
Skimmer Water Level: 7″ to 9.5″ adjustable
Drain Input Fittings: 1
Filter Socks: 1
Item No. FT-TS-SAP20
2 Reviews
-
Trigger Systems Sapphire Cube
This is simply the best sump that I ever owned! After 10 years in the reef keeping hobby I finally upgraded to a Trigger System sump and wish i had done it 9 years ago awesome sump!!!
-
GREAT FOR CUBE TANK
I have this on my 60 cube and it works awesome, allows for a skimmer with big footprint which is nice and big return area for a large pump to run a manifold. The acrylic scratches super easy though so cleaning the part with the refugium be careful!
