Tunze Hydrofoamer 9410.040 Silence Pump (9410.040)
TUNZE® Hydrofoamers Silence are specially developed pumps for TUNZE® protein skimmers DOC Skimmer and Master DOC Skimmer. They can also be used as replacement needle wheel pumps on any suitable skimmer available on the market. Additionally, they have a high air output at a very low power consumption and low operating noise.
The performance tables include a tolerance of +/- 15%. Depending on the skimmer reactor, the performance may vary due to the counterpressure of the water column.
Tunze Hydrofoamer 9410.040 Silence Pump (9410.040) Specifications:
Mains connection: 230V/50Hz (115V/60Hz), 2m (78.7 in.) cable.
Maximum air capacity: 600l/h (160 USgal./h) at a water flow rate of 900l/h (235 USgal./h).
Energy consumption: 11W (15W) at an air capacity of 600l/h (160 USgal./h).
Motor winding with protective thermostat.
Pump outlet with ¾ in. BSP thread (NPT).
Pump housing with strainer and silencer.
Pump drive: Rotor with high-performance one-part magnet, with all-ceramic bearing.
Equipped with air regulation and silencer.
Tunze Hydrofoamer 9410.040 Silence Pump (9410.040)
TUNZE® Hydrofoamers Silence are specially developed pumps for TUNZE® protein skimmers DOC Skimmer and Master DOC Skimmer. They can also be used as replacement needle wheel pumps on any suitable skimmer available on the market. Additionally, they have a high air output at a very low power consumption and low operating noise.
The performance tables include a tolerance of +/- 15%. Depending on the skimmer reactor, the performance may vary due to the counterpressure of the water column.
Tunze Hydrofoamer 9410.040 Silence Pump (9410.040) Specifications:
Mains connection: 230V/50Hz (115V/60Hz), 2m (78.7 in.) cable.
Maximum air capacity: 600l/h (160 USgal./h) at a water flow rate of 900l/h (235 USgal./h).
Energy consumption: 11W (15W) at an air capacity of 600l/h (160 USgal./h).
Motor winding with protective thermostat.
Pump outlet with ¾ in. BSP thread (NPT).
Pump housing with strainer and silencer.
Pump drive: Rotor with high-performance one-part magnet, with all-ceramic bearing.
Equipped with air regulation and silencer.
Item No. WP-TZ-9410.040
1 Review
-
Excellent Skimmer Pump
I purchased this pump to replace a burnt out stock pump that came with my Vertex IN-100 Protein Skimmer. Rather than purchase a brand new skimmer, I thought it would be best to buy a new pump, and I'm happy that I did! First impressions of this pump are that it is a powerful little unit that uses less power consumption than my stock pump. It fit almost perfectly onto the skimmer body, I just needed to add a rubber gasket around the output of the pump, which connects to the elbow leading into the skimmer. It's dead quiet and was pulling a foam head within 2 hours of installation. <br>As some skimmer pumps are, this pump does get slightly finicky when feeding or adding additives. No worries though, it gets a foam going strong again in about an hour. <br>I would recommend this as a suitable replacement skimmer pump- even if you don't have a Tunze skimmer body. I will update after a year's use to speak to reliability.
